VSS Monitoring V 2.4 S.X-N-AF - 10G 2x4 Distributed Filter Tap Reviews | Network Tap Reviews Fiber Copper Gigabit Ethernet

By: VSS Monitoring V 2.4 S.X-N-AF - 10G 2x4 Distributed Filter Tap

VSS Monitoring V 2.4 S.X-N-AF - 10G 2x4 Distributed Filter Tap

The 10G 2x4 Distributed Filter Tap allows Tapping, Aggregation, and Filtering of two Inline networks or four SPAN 10 Gigabit networks using its ports for security and performance. Eight LC connectors provide network input. Each of its eight XFP 10 Gigabit ports is available for output of aggregated or non-aggregated traffic allowing security; network monitoring; or forensics tools unfettered access to high-speed links. All ports are configurable as SPAN inputs or monitor outputs. XFP ports on inline builds are also I/O configurable.

This device enables local management via a serial console and remote management via Telnet, HTTP, and SNMP. A filter option enables screening of the monitoring traffic to ensure zero packet-loss during aggregation as well as increased input capacity. Filtering also allows traffic to be distinguished according to source and destination MAC/IP address as well as by specific protocols, such as HTTP, VoIP, etc. SNMP traps enable user notification of port status, user login, and management configuration changes. A custom filter offset allows monitoring devices targeted at specific protocols to view tunneled traffic, e.g. GTP tunnels, to view only the traffic of interest.

Redundant power supplies allow seamless transitions between power systems and maximize uptime. All VSS managed devices support field firmware updates for additional features and performance enhancements.