VSS Monitoring V 2.16 X.C-NF-AF - 10/100/1000/10G 2x16 Distributed Filter Tap

By: VSS Monitoring V 2.16 X.C-NF-AF - 10/100/1000/10G 2x16 Distributed Filter Tap

VSS Monitoring V 2.16 X.C-NF-AF - 10/100/1000/10G 2x16 Distributed Filter Tap

The V 2.16 Distributed Filter Tap allows Tapping, Aggregation, and Filtering of networks ranging from 10 Mbps to 10 GigE using any of its 18 ports for security and performance. Two XFP 10 Gigabit ports are available for input or output configuration. Each of its 16 dedicated copper UTP 10/100/1000 or 16 Fiber Gigabit ports are available for inline network traffic, SPAN traffic, or output from any of the other ports on the device. Each of the 18 ports is independently controlled and flexible, allowing the user to forward any group of network ports to any monitoring device. The V 2.16 offers exceptional value for corporations who have combinations of 1 Gigabit and 10 Gigabit networks. All ports are configurable as SPAN inputs or monitor outputs. XFP ports on inline builds are also I/O configurable.

This device enables local management via a serial console and remote management via Telnet, HTTP, and SNMP. A filter option enables screening of the monitoring traffic to ensure zero packet-loss during aggregation as well as increased input capacity. Filtering also allows traffic to be distinguished according to source and destination MAC/IP address as well as by specific protocols, such as HTTP, VoIP, etc. SNMP traps enable user notification of port status, user login, and management configuration changes. A custom filter offset allows monitoring devices targeted at specific protocols to view tunneled traffic, e.g. GTP tunnels, to view only the traffic of interest.

Redundant power supplies allow seamless transitions between power systems and maximize uptime. All VSS managed devices support field firmware updates for additional features and performance enhancements.

Network TAP Description:

VSS Monitoring V 2.16 X.C-NF-AF - 10/100/1000/10G 2x16 Distributed Filter Tap

Network Tap Reviews Fiber Copper Gigabit Ethernet Reviews & Information.

This Network TAP Review is Brought to you by:

Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:

Datacom Systems Inc. Fiber TAP F50/50/9-4LCS

F50/50/9-4LCS Data Sheet ...

By: Datacom Systems Inc. Fiber TAP F50/50/9-4LCS

Datacom Systems Aggregation TAP - SS-200

SS-200 Data Sheet ...

By: Datacom Systems Aggregation TAP - SS-200

Netoptics 4x1 GigaBit Regeneration Tap P/N: RGN-SX-IL4, RGN-LX-IL4

Net Optics 4x1 GigaBit Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit fiber networks. For a complete picture of network health, these Taps connect up to four different network...

By: Netoptics 4x1 GigaBit Regeneration Tap P/N: RGN-SX-IL4, RGN-LX-IL4

Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:

Troubleshooting VoIP Problems Using Wireshark

Vendors would have you believe you need to spend thousands of dollars on protocol analyzer software to troubleshoot Voice over IP (VoIP) networks. After..


WireShark: Filter Concepts

The most frequent questions we receive are about how to create filters with a packet-sniffer. In an article titled "The 7 Most Common Mistakes Using Packet-Sniffers" I do touch on this topic...


WireShark Network Analysis: Help

INTRODUCTION The purpose of this document is to introduce the packet sniffer WIRESHARK. WIRESHARK would be used for ..


Wireshark tutorial: How to sniff network traffic

Troubleshoot your networked applications using the Wireshark network protocol analyzer. This gentle introduction gets you up and running in fifteen minutes or less. If you've ever wanted the fas..


About Wireshark

About Wireshark Wireshark is the world's foremost network protocol analyzer, and is the de facto (and often de jure) standard across many industries and educational institutions. Wireshark developm...



Featured Links:




Network Tap Reviews Fiber Copper Gigabit Ethernet , Test Access Point , Ethernet Taps , 10/100/1000 , regeneration tap