Netoptics 2x1 OC-3 Regeneration Tap P/N: RGN-MM-OC3-IL2, RGN-SM-OC3-IL2
By: P/N: RGN-MM-OC3-IL2, RGN-SM-OC3-IL2
Net Optics 2x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect two different network management and security devices at any single OC-3 network location.
One Tap, No Idle Resources
Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments.
Net Optics unique dust cap is tethered to the connector so it is always right where you need it.
Security and Visibility
Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.
Network TAP Description:
2x1 OC-3 Regeneration Tap
P/N: RGN-MM-OC3-IL2, RGN-SM-OC3-IL2
Real-time, simultaneous passive monitoring of OC-3 links with up to two intrusion detection systems, protocol analyzers, RMON probes or other devices. Available in multimode and singlemode models in 2x1, 4x1, and 8x1 densities.
This Network TAP Review is Brought to you by:
Review Sponsorships Available
Short description about your link.
Add your link here
Review Sponsorships Available
Short description about your link.
Add your link here
Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:
Netoptics GigaBit Fiber SFP Port Aggregator Tap P/N: TPA-SX5-SFP, TPA-SX4-SFP, TPA-LX5-SFP, TPA-LX4-SFP
Net Optics GigaBit Port Aggregator with SFP Monitor Ports provides ultra-efficient access to critical links. Typically, full-duplex monitoring with a network tap requires two NICs – one interface for each side of the...
VSS Monitoring V 4.1 C.Z-F-A-span - 10/100/1000 4x1 TX-ZX Aggregator
VSS Monitoring V 4.1 C.Z-F-A-span - 10/100/1000 4x1 TX-ZX Aggregator The 10/100/1000...
By: VSS Monitoring V 4.1 C.Z-F-A-span - 10/100/1000 4x1 TX-ZX Aggregator
Netoptics 2x1 OC-3 Regeneration Tap P/N: RGN-MM-OC3-IL2, RGN-SM-OC3-IL2
Net Optics 2x1 OC-3 Regeneration Taps solve the key physical layer challenges of multi-device monitoring for OC-3 networks. For a better picture of network health, these Taps connect two different network management and secur...
Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:
Server backups. The silent source of frustration in certain data centers. Whether they are simply firing at times when production traffic is contending for server resource, or are just taking hours lo...
Server Backup Delay Over Gigabit Ethernet
Have you ever experienced a backup that takes much longer than you think it should? Even with networks running faster than light these days, sometimes a server backup can take hours longer than the nu...
Identifying Slow Server Response
Why is tracking down a server performance problem so difficult? First, it can be hard to dig through thousands of packets to find a solid example of a slow response. Once a slow response is isolated, ...
Datacom Systems Inc. - SINGLEstream 1214LX-10G
Datacom Systems Inc. - SINGLEstream™ 1214LX-10G Aggregation The SINGLEstream™ 1214LX-10G can combine data from up to five single mode Gigabit network segments ..
Troubleshooting Slow Applications
Slow applications, who doesn’t have them from time to time? Even networks that are in tip-top shape can have issues in application performance. On many occasions when we start troubleshooting a ...
