Netoptics 10 GigaBit SR to LR Tap P/N: CVT-50SR5/LR Reviews | Network Tap Reviews Fiber Copper Gigabit Ethernet

By: Netoptics 10 GigaBit SR to LR Tap P/N: CVT-50SR5/LR

Net Optics 10 GigaBit SR to LR Tap simplifies connecting LR fiber monitoring and security devices to SR fiber network links. Convert SR to LR and tap into the link with one device, reducing cost and complexity at the same time.
10 GigaBit SR to LR Taps are optimized, high-performance devices that support passive monitoring of 10 GigaBit links at speeds of 10 Gbps.

Transparent Access

10 GigaBit SR to LR Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. Net Optics unique dust cap is tethered to the connector so it is always right where you need it. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Operating Specifications:
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply:  
Input: 100-240VAC, 0.5A, 47-63Hz
(AC100-125V~30 VA, 50-60 Hz, for Japan)
Output: 5 VDC, 2 A (5 VDC, 2.4 A for UK and Japan)
Dimensions: 1.75” high x 10.5” deep x 17” wide

Connectors:
(1) Duplex SC connectors (monitor port)
(2) Duplex SC connectors (network ports)

Fiber Optic Interface:
Fiber Type:
Multimode Corning 50µm, wavelength 850nm (SR)
Singlemode Corning 8.5µm, wavelength 1310nm (LR)
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and EN 60825-1, also UL 1950 applications.
Optical Transmitter Wave Length:
850 nm nominal (SR), 1310 nm nominal (LR)
Output Power:
-9.5 dB min, -4 dB max (SR), -10 dB min, -3 dB max (LR)
Optical Receiver Input Sensitivity:
0 dB min, -17 dB max (SR), -3 dB min, -20 dB max (LR)

Certifications:
Fully RoHS compliant

Part Numbers:
CVT-50SR5/LR
CVT-50SR4/LR