Netoptics 10 GigaBit LC Fiber Tap - P/N: TP-SR5-LCSLM Reviews | Network Tap Reviews Fiber Copper Gigabit Ethernet

Netoptics 10 GigaBit LC Fiber Tap - P/N: TP-SR5-LCSLM

By: Netoptics 10 GigaBit LC Fiber Tap - P/N: TP-SR5-LCSLM

The need to measure traffic loads on networks that carry VoIP, videoconferencing, and security applications has never been greater. A reliable, high-performance 10Gbps cabling system that utilizes passive in-line Taps is a fundamental asset in today’s leading organizations, to increase productivity while decreasing operational costs.

Net Optics 10 GigaBit LC-based Fiber Taps are optimized and tested for high-performance 10Gbps fiber networks. Available in single-mode and multi-mode fiber, the 10 GigaBit Tap supports passive monitoring, stealth operation, and
24x7 reliability.

All Optical Design

Requiring no power, the 10 GibaBit LC Fiber Taps maintain permanent access ports for monitoring tools, without introducing a point of failure or interfering with network connections. The passive nature of the 10 GigaBit Tap delivers full-duplex monitoring with 100 percent network traffic visibility, including layer 1 and 2 errors. The optical split ratio can be selected to match the monitoring requirements of your network.

Splitter Specifications:

Fiber Type: Corning Multimode 62.5/125µm, wavelength, 850nm

Split Ratio	Network Port Insertion Loss	Monitor Port Insertion Loss
90/10	1.3 dB	11 .5 dB

80/20	1.8 dB	8.1 dB

70/30	2.4 dB	6.3 dB

60/40	3.1 dB	5.1 dB

50/50	4.5 dB	4.5 dB

Fiber Type: Corning Singlemode 8.5/125µm, wavelength, 1310nm

Split Ratio	Network Port Insertion Loss	Monitor Port Insertion Loss
90/10	0.8 dB	12.0 dB

80/20	1.3 dB	8.0 dB

70/30	2.0 dB	6.1 dB

60/40	2.8 dB	4.8 dB

50/50	3.7 dB	3.7 dB

Operating Specifications:
Operating Temperature: -40ºC to 85ºC
Storage Temperature: -55ºC to 85ºC
Relative Humidity: 10% min, 95% max, non-condensing

Mechanical Specifications:
Dimensions: .8” high x 4.25” deep x 4” wide

Connectors:
(1) Duplex LC connector (monitor port)
(2) Duplex LC connectors (network ports)

Certifications:
Fully RoHS compliant

Part Numbers:
10 GigaBit Multimode Fiber Tap
TP-SR5-LCSLM
TP-SR4-LCSLM
TP-SR3-LCSLM
TP-SR2-LCSLM
TP-SR1-LCSLM
10 GigaBit Singlemode Fiber Tap
TP-LR5-LCSLM
TP-LR4-LCSLM
TP-LR3-LCSLM
TP-LR2-LCSLM
TP-LR1-LCSLM

Network TAP Description:

10 GigaBit LC Fiber Tap
NEW! P/N: TP-SR5-LCSLM, TP-LR5-LCSLM
The new slim profile of the 10 GigaBit Fiber Tap allows you to install up to eight Taps in a one rack unit panel. Designed specifically for monitoring 10 GigaBit networks. Available in multimode and singlemode models to support passive monitoring at 10,000 Mbps.

Network Tap Reviews Fiber Copper Gigabit Ethernet Reviews & Information.

This Network TAP Review is Brought to you by:

Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:

VSS Monitoring V 1.2 S.S-J-AF2 - Gigabit 1x2 Fiber Filter Tap

VSS Monitoring V 1.2 S.S-J-AF2 - Gigabit 1x2 Fiber Filter Tap Available with conversion (SM to MM and MM to SM) functionality, this Tap guarantees the preservation of packet order during aggregation. A filter optio...

By: VSS Monitoring V 1.2 S.S-J-AF2 - Gigabit 1x2 Fiber Filter Tap

Network Instruments Optical to Copper Conversion nTAP

...

By: Network Instruments Optical to Copper Conversion nTAP

VSS Monitoring V 12.4 L.C-J-AS - Gigabit 12x4 LX-TX Aggregator

VSS Monitoring V 12.4 L.C-J-AS - Gigabit 12x4 LX-TX Aggregator The 12x4 Port Aggrega...

By: VSS Monitoring V 12.4 L.C-J-AS - Gigabit 12x4 LX-TX Aggregator

Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:

Troubleshooting VoIP Problems Using Wireshark

Vendors would have you believe you need to spend thousands of dollars on protocol analyzer software to troubleshoot Voice over IP (VoIP) networks. After..

WireShark: Filter Concepts

The most frequent questions we receive are about how to create filters with a packet-sniffer. In an article titled "The 7 Most Common Mistakes Using Packet-Sniffers" I do touch on this topic...

WireShark Network Analysis: Help

INTRODUCTION The purpose of this document is to introduce the packet sniffer WIRESHARK. WIRESHARK would be used for ..

Wireshark tutorial: How to sniff network traffic

Troubleshoot your networked applications using the Wireshark network protocol analyzer. This gentle introduction gets you up and running in fifteen minutes or less. If you've ever wanted the fas..

About Wireshark

About Wireshark Wireshark is the world's foremost network protocol analyzer, and is the de facto (and often de jure) standard across many industries and educational institutions. Wireshark developm...

Featured Links:

- Your link here

Newest TAP Reviews:

Website Navigation

Network TAP Vendors:

Network TAP Directory

Featured TAP Vendor

Advertise Here

-Advertise With Us

Network TAP

A network TAP is a hardware device which provides a way to access the data flowing across a computer network. Computer networks, including the Internet, are collections of devices, such as computers, routers, and switches, that are connected to each other. The connections can utilize different technologies, such as Ethernet, 802.11, FDDI, and ATM. In many cases, it is desirable for a third party to monitor the network traffic between two points in the network, point A and point B. If the network between points A and B consists of a physical cable, a network TAP may be the best way to accomplish this monitoring. The network TAP has at least three ports -- an A port, a B port, and a monitor port. To place a TAP between points A and B, the network cable between point A and point B is replaced with a pair of cables, one going to the TAP's A port, one going to the TAP's B port. The TAP passes through all traffic between A and B, so A and B still think they are connected to each other, but the TAP also copies the traffic between A and B to its monitor port, enabling a third party to listen.

Netoptics 10 GigaBit LC Fiber Tap - P/N: TP-SR5-LCSLM Reviews | Network Tap Reviews Fiber Copper Gigabit Ethernet