Netoptics 10/100/1000BaseT Tap P/N: TP-CU3

By: Netoptics 10/100/1000BaseT Tap P/N: TP-CU3

Get total traffic visibility for 10/100/1000 monitoring and security devices by placing Net Optics 10/100/1000BaseT Taps on critical network links. 10/100/1000BaseT Taps support passive monitoring of 10/100/1000 links at 10, 100, or 1000 Mbps. This Tap is ideal when a passive Tap is required for use with a variety of copper monitoring devices.

For superior reliability, the 10/100/1000BaseT Tap features Link Fault Detect (LFD), which gives the devices connected to the Tap critical information about link status. If either side of the bi-directional link fails, the Tap immediately communicates the fault to both devices, reducing the time required to activate a redundant path.

Transparent Access

The 10/100/1000BaseT Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. The 10/100/1000BaseT Tap either auto-negotiates communication or uses an external DIP switch to set fixed speed and duplexing parameters. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock.

Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Simply Plug It In
Full-duplex monitoring is a snap when each side of the signal is sent to a separate NIC on the monitoring device.  All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.


Reliability

For extra uptime protection, Net Optics 10/100/1000BaseT Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source.

Network TAP Description:

   10/100/1000BaseT Tap
P/N: TP-CU3
Designed specifically for monitoring 10/100/1000 triple speed networks. Supports passive monitoring of links at 10, 100, or 1000 Mbps.

Network Tap Reviews Fiber Copper Gigabit Ethernet Reviews & Information.

This Network TAP Review is Brought to you by:

Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:

Netoptics GigaBit LC Fiber Tap P/N: TP-SX5-LCSLM, TP-LX5-LCSLM

...

By: Netoptics GigaBit LC Fiber Tap P/N: TP-SX5-LCSLM, TP-LX5-LCSLM

Network Critical Fiber Aggregating or Regenerating

iber Aggregating or Regenerating ...

By: Network Critical Fiber Aggregating or Regenerating

VSS Monitoring V 6.6 C.C-E - 10/100 6x6 TX Copper Tap

VSS Monitoring V 6.6 C.C-E - 10/100 6x6 TX Copper Tap The 10/100 6x6 copper Tap allows the uninterrupted pass through of 6 full duplex networks over standard UTP cable. Enabling auto negotiation be...

By: VSS Monitoring V 6.6 C.C-E - 10/100 6x6 TX Copper Tap

Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:

File Handling - Its Impact on Server Backups

Server backups. The silent source of frustration in certain data centers. Whether they are simply firing at times when production traffic is contending for server resource, or are just taking hours lo...


Server Backup Delay Over Gigabit Ethernet

Have you ever experienced a backup that takes much longer than you think it should? Even with networks running faster than light these days, sometimes a server backup can take hours longer than the nu...


Identifying Slow Server Response

Why is tracking down a server performance problem so difficult? First, it can be hard to dig through thousands of packets to find a solid example of a slow response. Once a slow response is isolated, ...


Datacom Systems Inc. - SINGLEstream 1214LX-10G

Datacom Systems Inc. - SINGLEstream™ 1214LX-10G  Aggregation The SINGLEstream™ 1214LX-10G can combine data from up to five single mode Gigabit network segments ..


Troubleshooting Slow Applications

Slow applications, who doesn’t have them from time to time? Even networks that are in tip-top shape can have issues in application performance. On many occasions when we start troubleshooting a ...



Featured Links:




Network Tap Reviews Fiber Copper Gigabit Ethernet , Test Access Point , Ethernet Taps , 10/100/1000 , regeneration tap