Datacom Systems Filtered Aggregation TAP - FSS-1000

By: Datacom Systems Filtered Aggregation TAP - FSS-1000

FSS-1000

Prevent Port Oversubscription and Data Overload

The SINGLEstream™ Aggregation Tap w/ Filtering gives you the power to apply port level packet filtering to your data, so you can easily ensure your network and security tools only receive traffic of interest. Line-rate filtering provides you the ability to eliminate unwanted traffic from your analysis tools or security sensors. With less data to work with, network devices run faster and more effectively. While filtering can eliminate the possibility of port oversubscription, providing an effective solution, especially for software-based monitoring systems.

Load Balance your Network Tools

Using the built-in technologies of link regeneration, and filtering, you can quickly and easily load balance both your network and your network tools and eliminate bottlenecks. Regeneration allows you to attach more than one device to a single full duplex network segment. Connect an analyzer and a security sensor to the same link, and you can troubleshoot your network without having to disconnect your IDS. Add filtering, and you can send only the data you want to each tool, improving monitoring efficiency, speed, and network uptime

Empower your Legacy Network Devices

Don’t throw out your old tools - empower them! With proper uses of filtering, you can use a 10/100 tool to monitor a Gigabit network. Available in fiber and copper, the Filtered SINGLEstream™ Link Aggregation Tap can maximize the ROI of your existing network devices.

With the Filtered SINGLEstream’s flexible “any to any” architecture, you can designate the port assignments to meet your specific needs. Any of the connected monitoring devices can see any of the connected network links. You can also quickly and easily change and customize port assignments on the fly with software, so there is no need to disconnect and reconnect any of the physical links if you want to assign a different tool to view a different network segment.

  • Flexible network connectivity - Small form pluggables (SFP) allow you to connect up to four (4) SX, LX, or 10/100/1000 monitoring tools. Network ports are available in both fiber and copper.
  • Easy to use client management interface – simply access and manage from anywhere in your network.
  • Built-in 512MB buffer manages utilization overflow and significantly reduces chances of port over-subscription.
  • Dual redundant power supplies insure seamless monitoring even if the main power source is unavailable.
  • Easy to install – 1U space-saving design fits conventional 19” rack.

Specifications

Network Connections
One (1) RJ45, LX, or SX Tap
Monitoring Connections
Four (4) RJ45 or SFP (LX or SX) Ports
Control Port
Serial DB9
Management Port
RJ45
Power
5VDC, 1.5A
Redundant Power Supply
Dimensions (H x W x D)
1.72 X 19 X 11.75 in
4.37 X 48.26 X 29.8 cm
Weight
7 lbs.
3.175 Kg
Operating Temperature
0° to 40° C
Storage Temperature
-30° to 65° C
Humidity
Less than 95° C non-condensing
Warranty
One (1) Year Limited Warranty - Support Contract Required
Ordering Information
FSS-1000 Filtered SINGLEstream™ Link Aggregation Tap

Network TAP Description:

Filtered SINGLE<em>stream</em>™ Link Aggregation Tap

Model Number: FSS-1000

The Filtered SINGLEstream™ Link Aggregation Tap gives you the power to apply port level packet filtering to your in-line monitoring solutions to ensure your network and security tools only get the data they need.

Network Tap Reviews Fiber Copper Gigabit Ethernet Reviews & Information.

This Network TAP Review is Brought to you by:

Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:

Netoptics GigaBit SX to TX Tap P/N: CVT-SX5/GCU

Net Optics GigaBit SX to TX Tap simplifies connecting GigaBit copper monitoring and security devices to SX fiber network links. Convert SX toTX and tap into the link with one device, reducing cost and complexity at the sam...

By: Netoptics GigaBit SX to TX Tap P/N: CVT-SX5/GCU

VSS Monitoring V 4.24 X.L-NF-AF - 10/100/1000/10G 4x24 Distributed Filter Tap

VSS Monitoring V 4.24 X.L-NF-AF - 10/100/1000/10G 4x24 Distributed Filter Tap The V ...

By: VSS Monitoring V 4.24 X.L-NF-AF - 10/100/1000/10G 4x24 Distributed Filter Tap

VSS Monitoring V 2.1 C.L FJ-A - 10/100/1000 2x1 TX-LX Aggregation Tap

VSS Monitoring V 2.1 C.L FJ-A - 10/100/1000 2x1 TX-LX Aggregation Tap The 10/100/100...

By: VSS Monitoring V 2.1 C.L FJ-A - 10/100/1000 2x1 TX-LX Aggregation Tap

Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:


Featured Links:




Network Tap Reviews Fiber Copper Gigabit Ethernet , Test Access Point , Ethernet Taps , 10/100/1000 , regeneration tap