Datacom Systems Inc. - 10/100-AT
By: Datacom Systems Inc. - 10/100-AT
The 10/100 Ethernet Tap is a single port device that provides a method to observe traffic on a full duplex Ethernet segment. The 10/100 Ethernet Tap provides easy access to segments while maintaining network integrity with "no break the link" design. Network performance will not be affected by power loss.
- Eliminates the need for network connectors to be disconnected and connected each time a segment needs to be analyzed
- Non-intrusive, fault-tolerant, invisible to the network
- Redundant power supply insures seamless monitoring even if the main power source is unavailable
- Never lose packets from power failure - industry-leading "no break the link" design guarantees network traffic will continue to flow uninterrupted
- View all traffic on both sides of full duplex links
- Reduces degradation of switch performance due to port mirroring
- View Layer 1 and 2 errors such as runts and CRC errors
- Comes with convenient built-in rack-mount or use an optional rack-mount package to mount 3 units (at 1U) and up to 14 units (at 4U).
- Passes all pairs
- Supports Power over Ethernet (PoE)
Specifications
| Network Connections | |
|---|---|
| 10/100 Tap (RJ45) | |
| Monitoring Connections | |
| 10/100 (RJ45) | |
| Power | |
| 5 VDC, 0.5A Redundant Power Supply |
|
| Dimensions (H x W x D) | |
| 1.07 X 5 X 5 in 2.7 X 12.7 X 12.7 cm |
|
| Weight | |
| 8 oz. .23Kgs |
|
| Operating Temperature | |
| 0° to 40° C | |
| Storage Temperature | |
| -30° to 65° C | |
| Humidity | |
| Less than 95° C non-condensing | |
| Certifications | |
| EN 50082-1 61000-4 Series EN 55022 Class A Low Voltage Directive 72-23-EEC (1993) CFR 47 Part 15 Class A CE Fully RoHS Compliant |
|
| Warranty | |
| Two (2) Years | |
| Ordering Information | |
| 10/100-AT | 10/100 Ethernet Tap |
| Optional Rack Mount | |
| RMC-3 | |
Network TAP Description:
Model Number: 10/100-AT
The 10/100 Full Duplex Ethernet Tap provides network monitoring tools with permanent 24x7 passive monitoring access to 10/100 BaseT Ethernet network segments. Our passive tap technology features exclusive, fault tolerant "no break the link" design ensures network performance will not be affected by power loss.
This Network TAP Review is Brought to you by:
Review Sponsorships Available
Short description about your link.
Add your link here
Review Sponsorships Available
Short description about your link.
Add your link here
Network Tap Reviews Fiber Copper Gigabit Ethernet Related Reviews:
Netoptics FX to TX Tap P/N: CVT-MM5/CU, CVT-SM5/CU
Net Optics FX to TX Tap simplifies connecting 100Mbps copper monitoring and security devices to FX fiber network links. Convert FX to TX and tap into the link with one device, reducing cost and complexity at the same time....
Datacom Systems Aggregation TAP - SS-2206BT-BT
SS-2206BT-BT Data Sheet ...
Datacom Systems Aggregation TAP - SS-1204BT-BT
SS-1204BT-BT Data Sheet ...
Updated Network Tap Reviews Fiber Copper Gigabit Ethernet Related News:
Vendors would have you believe you need to spend thousands of dollars on protocol analyzer software to troubleshoot Voice over IP (VoIP) networks. After..
WireShark: Filter Concepts
The most frequent questions we receive are about how to create filters with a packet-sniffer. In an article titled "The 7 Most Common Mistakes Using Packet-Sniffers" I do touch on this topic...
WireShark Network Analysis: Help
INTRODUCTION The purpose of this document is to introduce the packet sniffer WIRESHARK. WIRESHARK would be used for ..
Wireshark tutorial: How to sniff network traffic
Troubleshoot your networked applications using the Wireshark network protocol analyzer. This gentle introduction gets you up and running in fifteen minutes or less. If you've ever wanted the fas..
About Wireshark
About Wireshark Wireshark is the world's foremost network protocol analyzer, and is the de facto (and often de jure) standard across many industries and educational institutions. Wireshark developm...
